 |
 |
|||||||
TECHNICAL SPECIFICATIONS |
||||||||
MODEL | LK
- 1 CS |
LK-1 HS | LK-251 HS | LK-2 HS | LK-3 HS | LK-4 HS | LK-5 HS | |
CUTTING
CAPACITY | ||||||||
Round mm | 175 |
200 | 250 | 300 | 350 | 400 | 450 | |
Square mm | 150
x 150 |
150 x 150 | 200 x 200 | 250 x 250 | 300 x 300 | 350 x 350 | 400 x 400 | |
| DRIVE | ||||||||
| Driver motor - 3 Phase, 440 volts | 0.5 H.P., 1440 RPM | 1 .0 H.P., 1440 RPM | 1.5 H.P., 1440 RPM | 2.0 H.P., 1000 RPM | 2.0 H.P., 1000 RPM | 2.0 H.P., 1000 RPM | 2.0 H.P., 1000 RPM | |
| Coolant Pump 3 Phase, 440 volts | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | 0.15 H.P., 2800 RPM | |
| Blade Speed meter / minute | 25 | 20 | 20 | 20 | 20 | 20 | 20 | |
| 30 | 35 | 35 | 35 | 35 | 35 | 35 | ||
| 40 | 55 | 55 | 55 | 55 | 55 | 55 | ||
| 75 | 75 | 75 | 75 | 75 | 75 | |||
M/C
SPECIFICATION | ||||||||
Saw
Blade - Carbon or BI-meter (mm) | 2540 x 20 x 0.9 | 3000 x 27 x 0.9 | 3200 x 27 x 0.9 | 3760 x 27 x 0.9 | 4100 x 34 x 1.1 | 4420 x 34 x 1.1 | 4570 x 34 x 1.1 | |
Floor
Space L x W x H (mm) | 1500 x 570 x 870 | 1630 x 580 x 895 | 1850 x 700 x 1000 | 2400 x 830 x 1050 | 2550 x 830 x 1050 | 2650 x 830 x 1200 | 2800 x 830 x 1200 | |
Net
Weight (Kg.) |
270 | 320 | 375 | 760 | 820 | 900 | 950 | |
Job is placed on machine vice and its length is set as per the requirement. Vice is clamp manually by its handle and Saw drive is mande on,,Saw Arm is moved down upto job then as per gravity / cutting pressure blade cutts the job, After cutting operation completes the machine automatically stops in lower position.
|
||||||||
| HOME I PROFILE I PRODUCTS I CONTACT US I FEEDBACK | ||||||||
MISTRY
LAXMAN KADVA MACHINES (P) LTD. Opp. Gas Godown, Sri Sri Gau Shala Compound, Jintan Udhyognagar, Surendranagar - 363002 (Gujarat) INDIA Phone :91-2752-224726 / 228161 Fax : 91-2752-231381 E-mail : laxson@laxsonbandsaw.com |
||||||||
